PerkinElmer Caliper IVIS Spectrum Hardware Manual Download Page 63

Page: 63 / 74

IVIS

Spectrum Hardware Manual

Servicing & Maintaining the ThermoCube Chiller Unit

Over time, the coolant level in the ThermoCube thermoelectric chiller unit may

diminish and require replenishing. It is recommended that you check the coolant

level in the ThermoCube unit every six months. This chapter explains how to

add coolant to the Thermocube unit.

10.1 Required Tools

The following tools and items are required, but not provided.

•

Allen Wrenches (hex head wrench): 3/32" and ¼" measured across the

flats (AF).

•

Measuring cup with a spout.

•

Spectral TE Camera Cooling Mixture (part no. 119219, includes a 3/32"

and ¼" allen wrench) or a solution of 25% pure ethanol, 75% distilled

water.

•

Paper towel or cloth for clean up.

10.2 Turning Off Electric Power to the Main Console

VOLTAGE

VOLTAGE!

Do not remove any panels from the console until you turn off the

IVIS Imaging System disconnect the power cord. Otherwise, electric shock

could result.

1. Pull the front toggle switch out and down to the standby position.
2. Turn off the main power switch on the rear panel and disconnect the console

power cord from the wall socket.

3. Move any cables away from the lowest rear panel of the console so that the

panel can be removed

(Figure 10.1)

. (No other cables need to be removed.)

Summary of Contents for Caliper IVIS Spectrum











































































Search results

Summary of Contents for Caliper IVIS Spectrum

Reviews:

Related manuals for Caliper IVIS Spectrum

Brands by name

Popular brands

PerkinElmer Caliper IVIS Spectrum, Hardware Manual

Search results

Summary of Contents for Caliper IVIS Spectrum

Reviews:

Related manuals for Caliper IVIS Spectrum

Brands by name

Popular brands