PerkinElmer Caliper IVIS Spectrum Hardware Manual Download Page 2

Page: 2 / 74

121450_Rev01

Caliper LIfe Sciences

68 Elm Street

Hopkinton, MA 01748

Main Phone: 1.508.435.9500

Fax: 1.508.435.3439

E-mail: [email protected]

www.caliperls.com

Discovery in the Living Organism, IVIS Imaging System and Living Image are either registered trademarks or

trademarks of Xenogen Corporation. The names of companies and products mentioned herein may be the

trademarks of their respective owners. Apple, Macintosh and QuickTime are registered trademarks of Apple

Computer, Inc. Microsoft, PowerPoint and Windows are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries. Adobe and Illustrator are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Summary of Contents for Caliper IVIS Spectrum











































































Search results

Summary of Contents for Caliper IVIS Spectrum

Reviews:

Brands by name

Popular brands

PerkinElmer Caliper IVIS Spectrum, Hardware Manual

Search results

Summary of Contents for Caliper IVIS Spectrum

Reviews:

Brands by name

Popular brands