82
Optical and Acoustical Statements
Visible LED Statement
The LEDs on this HDDR unit are classified as “Class 1 LED Product” in accordance with EN 60825-1.
Laser Safety Statement for a Class 1 Laser Product
This CDROM Storage device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruction manual may cause harmful
interference. If this equipment does cause harmful interference to radio or television reception, the user is can attempt
to correct this by following one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
•
Consult the dealer or an experienced radio TV technician for help.
This mass-storage system does not produce hazardous laser radiation. Because laser light emitted inside the mass-
storage system is completely confined within protective housings and external covers, the laser beam cannot escape
from the machine during any phase of user operation.
CAUTION:
Due to the extremely fast rotation speed of the CD-ROM drive spindle motor (9000 ~ 12000 rpm), the
drive’s performance could be affected by using substandard discs. These substandard discs may be damaged, or
damage the CD-ROM drive.
CAUTION:
•
Always check each disc for cracks before using it. If there are cracks on the surface, especially on the border of
the center hole, do not use it in the CD-ROM drive. Using such discs can cause irreparable damage to the CD-
ROM drive.
•
Do not leave discs in direct sunlight or in a hot, humid location.
•
Always remove discs from the drive after use.
•
To protect the discs from scratches, never touch their face or place them face down on a hard surface.
•
Do not affix highly adhesive stickers to a disc.
Regulation on Noise Declaration for Machines
Lpa < 70 dB operator position, normal operation, per ISO 7779
