background image

 

8

 

1. Read 

Owner’s 

Manual

 

After unpacking this product, read the owner’s manual carefully, and follow all the operating and 
other instructions. 
 

2. 

Power Sources

 

This product should be operated only from the type of power source indicated on the label. If you 
are not sure of the type of power supply to your home or business, consult your product dealer or 
local power company. 

 

3. 

Ventilation

 

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of 
the product and to protect it from overheating, and these openings must not be blocked or 
covered. The product should not be placed in a built-in installation such as a bookcase or rack 
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 

 

4. 

Heat

 

The product should be situated away from heat sources such as radiators. Heat registers, stoves, 
or other product that produce heat. 

 

5. 

Water and Moisture

 

Do not use this product near water. Do not exceed the humidity specifications for the product as 
detailed in the Appendix section in this manual. 
 

6. 

Cleaning

 

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol 
cleaners. Use a damp cloth for cleaning.  
 

7. 

Power Cord Protection

 

Power-supply cords should not be routed so that they are not likely to be walked on or pinched by 
items placed against them, paying particular attention to cords at plugs, convenience receptacles, 
and the point where they exit from the product. 
 

8. 

Overloading

 

Do not overload wall outlets; extension cords, or integral convenience receptacles as this can 
result in a risk of fire or electrical shock. 

 

9. 

Lightning

 

For added protection for this product during storm, or when it is left unattended and unused for 
long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to 
lightning and power line surges.

 

 

10. 

Object and Liquid Entry Points

 

Never insert foreign objects into the HDDR unit, other than the media types approved by 
OpenEye, as they may touch dangerous voltage points or short-out parts that could result in a fire 
or electrical shock. Never spill liquid of any kind on the product. 
 

11. 

Accessories

 

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may 
fall, causing serious personal injury and serious damage to the product.

 

IMPORTANT SAFETY INSTRUCTIONS

 

Summary of Contents for Open Eye HDDR-X240






















































































Reviews: