36
Camera Information
Motion Setting
4.2.1
Several Setup options are available for each camera individually.
These options are listed below.
Name
– Allows you to specify a name for each camera.
Bright
– Adjusts the Brightness of the selected camera.
Hue
– Adjusts the Hue of the selected camera.
Contrast
– Adjusts the Contrast of the selected
camera.
Adjust
Default
– Adjust the color settings for the
selected camera back to the System default.
Adjust
All
Default
– Adjusts the color settings for ALL
cameras to the System default.
4.2.2
The HDDR unit allows you to adjust several different Motion Settings.
Beep
on
Detect
– When motion is detected an alarm is
sounded.
Full Screen Pop-Up
– When Motion is detected, the
camera is brought up in full screen mode.
Alarm
Output
– Enables the Alarm Output. The Alarm
Output is always defaulted to Control Output #16.
Control Output #16 is System designated default for an
external alarm.
Sensitivity
– Adjusts the sensitivity within the
designated Motion Area.
Clear
Motion
Area
– Clears all Motion Areas for the
selected camera.
Figure 4.2.1
1
2
3
4
5
Figure 4.2.1
4
1
2
3
5
6
6
Figure 4.2.2
1
2
3
4
5
Figure 4.2.2
4
1
2
3
5
