46
Use
by
Time
– This option Enables/Disables the Use by Time feature. When activated the Use by Time feature
allows you to specify a time period that the Control output will be operational. For example you could disable the
control output during work hours so that alarms will not go off when a door is opened and a sensor is tripped.
Name
– This option allows you to assign a meaningful name the Control Output. (ex. Warehouse Siren)
Auto ON
– The time at which the Control Output will be available for use.
Auto
OFF
– The time at which the Control Output will be disabled and not available for use.
Sensor Number for Alarm Output (Siren)
– Associates the selected Sensor to the Siren (Control Output #16).
When the sensor is tripped the Siren is immediately activated.
Transmission
Sensor
– Specifies which sensors will activate the Emergency Agent software. You can specify
more than one sensor by separating them with commas. (ex. 2,4,13,15,16)
Transmission
Duration
– Specifies the amount of time (in seconds) to transmit the video in the Emergency
Agent Software.
ATM/POS
Setup
– This option allows you to change the settings that connect an ATM /POS device to the
HDDR.
7
8
9
10
13
14
12
11