Particulate Systems NanoPlus, Operator'S Manual, Page: 53 / 252

NanoPlus Operator’s Manual SOP Designer
Mar 2014 3-33
Diluent Parameters Panel
Categorically
Alphabetically
Select the List icon to display parameters by category and the AZ icon to
display them alphabetically.
Parameter Panels are unavailable for a User assigned at the Operator level when in
Security mode.
The following table lists the diluent parameters in alphabetical order. All parameters are shown for
the Normal and Advanced modes and are applicable for Size and Zeta measurements. Refer to
Appendix B, page
B-1 for additional information on diluent constants.
Group Parameter Description
General Comment Enables you to enter a comment about the diluent.
You can enter up to 40 characters.
Condition Name Identifies the diluent. Use a unique, easily
recognizable name. You can use up to 40 characters.
You can also use the Diluent Name as the Condition
Name.
Diluent Name Click the down arrow and select the diluent from the
drop-down list.
Properties Dielectric Constant Displays the dielectric constant of the selected
diluent.
Refractive index Displays the refractive index of the selected diluent.
Viscosity Displays the viscosity of the selected diluent.