Particulate Systems NanoPlus, Operator'S Manual, Page: 17 / 252

NanoPlus Operator’s Manual Turning the System On and Off
Mar 2014 2-5
Turning the System On and Off
It is very important that you follow the steps outlined below when turning the
NanoPlus system on and off.
1. Turn on the computer.
2. Place the power switch on the left panel of the analyzer in the ON ( | ) position.
Orange: during startup

Green: startup complete
3. Double-click the NanoPlus icon on your desktop or select the application from your
Programs list.
• If your Security settings are set to Security or 21 CFR Part 11 , a dialog prompting you to
enter your User ID and Password is displayed.
• After a brief initialization, the opening screen of the software is displayed.
4. Allow approximately 30 minutes for the system to stabilize before taking measurements.
To turn off the system:
1. Select File > Exit to close the NanoPlus software; the Quit dialog is displayed.
If your Security settings are set to Security or 21 CFR Part 11 , you will be automatically
logged out when you click OK .
2. Allow the instrument to complete shut-down routine, then turn off the instrument.
3. Turn off the computer.