Particulate Systems NanoPlus, Operator'S Manual, Page: 46 / 252

SOP Designer NanoPlus Operator’s Manual
3-26 Mar 2014
Common Parameters
The following table lists the common cell parameters for Size and Zeta Potential analyses.
Parameters are listed in alphabetical order; Advanced ones are italicized for easy recognition.
Group Parameter Description
General Cell Center X (mm)

Cell Center Z (mm)
Displays the optimal positions of the cell on the X and
Z axes. The values are the default ones unless a cell
center adjustment has been performed and saved, in
which case it will be shown. These fields are not
shown for Cell Types 2 and 4.
See Detecting the Optimal Cell Position, page 4-6 for
additional information.
Cell Name Select the field to display a button to the right. Click
the button to display a list of registered cells for the
Measurement type you choose (Size or Zeta). This
example shows the list for Size.
Be sure the sample conductivity is
lower than ~3 ms/cm when using the
High Concentration cell. A higher
conductivity may damage the cell.
If performing gradient temperature analyses, you
must use one of the following cells; analysis will not
proceed with any other type.
Measurement Cell Type Temperature
Range (

C)
Size
Size cell (glass) 5.0 to 90.0
Size cell (Dispo) 5.0 to 50.0
Size cell (micro) 5.0 to 90.0
Zeta
Flow cell 5.0 to 90.0
Zeta cell (Dispo) 5.0 to 50.0