Particulate Systems NanoPlus, Operator'S Manual, Page: 174 / 252

Maintenance NanoPlus Operator’s Manual
A-28 Mar 2014
Measurement Setup for the Size Flow Cell using AutoTitrator
Set the Measurement step for the size flow cell with Titrator as follows:
1. Inset the cell into the cell block.
2. Select Size Cell (Flow) as a cell name in the Cell Parameter of the Size SOP Designer.
3. Select Type 3 or Type 4 as the measurement type.
Refer to Preparing for Measurement, page A-9 AutoTitrator for detail of measurement
setup.
4. Click Start to start the measurement.