manualshive.com logo in svg

Particulate Systems NanoPlus, Operator'S Manual, Page: 235 / 252

Share
Download
Particulate Systems NanoPlus Operator'S Manual Download Page 235

NanoPlus Operator’s Manual

Activating 21 CFR Part 11

Mar 2014                                                  

F-3 

5.

Enter the code and click 

OK

; a query is displayed.

6.

Click 

OK

 to save the changes; a dialog prompting you to restart is displayed. Click 

OK

 to 

close the dialog. You must restart for the changes to take effect.

7.

Click 

File > Exit 

to close the program.  

8.

Restart the NanoPlus software.

Enabling CFR Part 11

The Security Settings must now be changed to complete activation. A user with Administrator 
rights is required for this procedure. 

1.

Select the 

Security

 command, then the 

Security Settings

 icon; the Security Settings dialog 

opens.

2.

Select the 

21 CFR Part 11

 option, and click 

OK

; a log-in dialog is displayed. 

3.

Enter your password and click 

OK

 to open the program.

Summary of Contents for NanoPlus





























































































































































































































































Reviews:

No comments