Particulate Systems NanoPlus, Operator'S Manual, Page: 18 / 252

Using the Software NanoPlus Operator’s Manual
2-6 Mar 2014
Using the Software
User Operating Modes
Three operating modes are available in the NanoPlus software:
No Security No user name or password is required upon software startup.
No restrictions are placed on access; therefore, all users can
use all functions. This is the default setting.
Security A user ID and password are required upon software startup.
The SOPs and measurement data are controlled based on
user level. This setting prevents other users from viewing
SOPs and measurement data.
21 CFR Part 11 A user ID and password are required upon software startup.
Authorized users can use electronic records and electronic
signatures in compliance with the FDA's Electronic Records
and Electronic Signatures Rule (21 CFR Part 11). Refer to
21 CFR Part 11, page F-1 for additional information.
Initial installation of the NanoPlus defaults to the No Security state.
Commands
Basic operations of the NanoPlus are performed using the SOP Designers and the Commands
listed on the side bar.
Refer to SOFTWARE COMMANDS, page 3-1 for a description of the SOP Designers and of each
command.