44
Modular Electric HMR Linear Drives
10 Decommissioning
10.1 Disassembly of a Machine or System
Disassembly and the final shutdown of the HMR must be carried out by trained mechanical or electrical specialists.
No stored energy (springs, fluid, pressure).
CAUTION
Crushing hazard due to unexpected movements
This could result in severe injuries
or damage to property.
► Bring system to a standstill and secure.
► Pay attention to the weight of any loads being lifted during vertical installation.
► Screws and toothed belts are not self-locking, which means that the Drive Type, carriage and load
could crash down.
10.2 Disposal
The HMR does not contain any hazardous substances that require special attention during disposal. Lubricant residue
is possible and should be expected.
In addition to the main aluminum component, there are also installed steel parts and plastics such as PU and NBR.
Non-ferrous metal is present in small quantities only.
Electrical components (if used during operation) such as the motor and electronic switches must be disposed of
according to the local regulations in force.