43
EN
► Remove the screws of the
belt clamping package
and lay out the belt.
► Repeat this with the other belt tensioning block.
► Remove
cover
from the
end cap drive end
and
end cap non drive end side
.
► Lay out the
belt
and take it out.
9.10.4 Installing Drive Type belt
Installation can be done in opposite sequence then disassembly.
Tension the belt as per section 9.7.2 on page 34.
NOTE
► Adhere to the tightening torques for screws
according to section 7.1 on page 12.
Belt
Belt
Belt clamping package
Cover
End cap non drive end
End cap drive end
Cover