46
Modular Electric HMR Linear Drives
M8 - Connector
11.2 Position Detection internal and external
For connecting up to a maximum of three magnetic switches, you will require the corresponding number of M8 mount-
ed connectors.
Use, installation and connection are described in section 7.5 cont.
With the external position detection the solenoid switches are fixed in the groove of the cover profile. The IP54 cover
is required for this.
Order numbers for parts for internal position detection
Designation
Order number
M8 mounted connector
54519FIL
Order numbers for parts for external position detection
T-slot cable holder T-Nut, VP 5St
56350FIL
M8 connector with cable 5 m
KL3186
M8 connector with cable 10 m
KL3217
M8 connector with cable 15 m
KL3216
Position detection
extern
intern/extern
Magnetschalter
M8 connector, snap in
FL = open lead
0.3 m
3 m
10 m
R2NO-I: Reed, 2-wire, normally open NO, internal
P8S-GRSHX
P8S-GRFAX
P8S-GRFDX
R2NC-I: Reed, 2-wire, normaly closed NC, internal
P8S-GESNX
P8S-GEFFX
P8S-GEFRX
P3NO-I: PNP, 3-wire, normally open NO, internal
P8S-GPSHX
P8S-GPFAX
P8S-GPFDX
P3NC-I: PNP, 3-wire, normaly closed NC, internal
P8S-GQSHX
P8S-GQFAX
P8S-GQFDX
N3NO-I: PNP, 3-wire, normally open NO, internal
P8S-GNSHX
P8S-GNFAX
P8S-GNFDX
N3NC-I: PNP, 3-wire, normaly closed NC, internal
P8S-GMSHX
P8S-GMFAX
P8S-GMFDX
T-slot switch