53
EN
12.8 Belt Tensioning Block
If the tensioning block is to be replaced, the product key must be indicated.
Example: HMR
B15
C
BD0
-1200-000000000
To ensure that a suitable tension block can be delivered, the following must be known at the very least:
• Drive type
B
= Belt
• Product size (
15
= width 150 mm)
• Motor mounting position (
BD
= 090° front double plain shaft)
• Carriage: (0 = Standard)
Order number tension block Belt Drive
Type of drive
Comments
Order number
HMRB08xBD…, HMRB08xDD…
Motor mounting 090/270, Standard
56219FIL
HMRB08xAP…, HMRB08xCP…, HMRB08xAD…, HMRB08xCD…
Motor mounting 000/180, Standard/Bipart
56220FIL
HMRB11xBD…, HMRB11xDD…
Motor mounting 090/270, Standard
56221FIL
HMRB11xAP…, HMRB11xCP…, HMRB11xAD…, HMRB11xCD…
Motor mounting 000/180, Standard/Bipart
56222FIL
HMRB15xBD…, HMRB15xDD…
Motor mounting 090/270, Standard
56162FIL
HMRB15xAP…, HMRB15xCP…, HMRB15xAD…, HMRB15xCD…
Motor mounting 000/180, Standard/Bipart
56163FIL
HMRB18xBD…, HMRB18xDD…
Motor mounting 090/270, Standard
56164FIL
HMRB18xAP…, HMRB18xCP…, HMRB18xAD…, HMRB18xCD…
Motor mounting 000/180, Standard/Bipart
56165FIL
HMRB24xBD…, HMRB24xDD…
Motor mounting 090/270, Standard
56166FIL
HMRB24xAP…, HMRB24xCP…, HMRB24xAD…, HMRB24xCD…
Motor mounting 000/180, Standard/Bipart
56167FIL
Clamping plate
Tighten plate
Toothed belt lock
Tension pin
Pusher