Parker H Series, Installation & Service Instructions Manual

Page: 341 / 344

Installation & Service Instructions
V464P
H Series HA , HB / H1, H2, H3
with Turck Fieldbus
ISSUED: September, 2016
Supersedes: June, 2010
Doc. #V-464P, EN# 160068, Rev. B
Introduction
Follow these instructions when installing, operating, or servicing
the product.
Application Limits
These products are intended for use in general purpose
compressed air systems only. Compliance with the rated
pressure, temperature, and voltage is necessary - see Installation
& Service Instructions packed with valve.
WARNING
Air exhausting from one valve into the exhaust gallery of the manifold
assembly may momentarily pressurize other valve circuits open to
the same gallery. Design the circuit such that there is no hazard or
consequence of damage from this action.
!
WARNING
To avoid unpredictable system behavior that can cause personal injury
and property damage:
• Disconnect electrical supply (when necessary) before installation,
servicing, or conversion.
• Disconnect air supply and depressurize all air lines connected to this
product before installation, servicing, or conversion.
• Operate within the manufacturer’s specifi ed pressure, temperature,
and other conditions listed in these instructions.
• Medium must be moisture-free if ambient temperature is below
freezing.
• Service according to procedures listed in these instructions.
• Installation, service, and conversion of these products must be
performed by knowledgeable personnel who understand how
pneumatic products are to be applied.
• After installation, servicing, or conversion, air and electrical supplies
(when necessary) should be connected and the product tested for
proper function and leakage. If audible leakage is present, or the
product does not operate properly, do not put into use.
• Warnings and specifi cations on the product should not be covered by
paint, etc. If masking is not possible, contact your local representative
for replacement labels.
!
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE
PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS
CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifi n Corporation, its
subsidiaries and authorized distributors provide product and/or system options
for further investigation by users having technical expertise. It is important
that you analyze all aspects of your application, including consequences of
any failure and review the information concerning the product or systems
in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own
analysis and testing, is solely responsible for making the fi nal selection of the
products and systems and assuring that all performance, safety and warning
requirements of the application are met.
The products described herein, including without limitation, product features,
specifi cations, designs, availability and pricing, are subject to change by Parker
Hannifi n Corporation and its subsidiaries at any time without notice.
EXTRA COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FOR INCLUSION
IN EQUIPMENT / MAINTENANCE MANUALS THAT UTILIZE THESE PRODUCTS.
CONTACT YOUR LOCAL REPRESENTATIVE.
!
Safety Guide
For more complete information on recommended application guidelines, see
the Safety Guide section of Pneumatic Division catalogs or you can download
the
Pneumatic Division Safety Guide at: www.parker.com/safety
Kits - with 16 Solenoid Outputs
Kit Number Description
PS5620T1*P HA / HB Turck Adapter Kit
PS5624T1*P HA / H2 Turck Adapter Kit
PS4025T1*CP H1 / H2 / H3 TurckAdapter Kit
PS4026T1*CP H1 / H3 Turck Adapter Kit
PS4027T1*CP H1 / H2 Turck Adapter Kit
PS4028T1*CP H2 / H3 Turck Adapter Kit
PS4020T1*CP H1 Turck Adapter Kit
PS4120T1*CP H2 Turck Adapter Kit
PS4220T1*CP H3 Turck Adapter Kit
Kits - with 32 Solenoid Outputs
Kit Number Description
PS5620T2*P HA / HB Turck Adapter Kit
PS5624T2*P HA / H2 Turck Adapter Kit
PS4025T2*CP H1 / H2 / H3 TurckAdapter Kit
PS4026T2*CP H1 / H3 Turck Adapter Kit
PS4027T2*CP H1 / H2 Turck Adapter Kit
PS4028T2*CP H2 / H3 Turck Adapter Kit
PS4020T2*CP H1 Turck Adapter Kit
PS4120T2*CP H2 Turck Adapter Kit
PS4220T2*CP H3 Turck Adapter Kit
Pneumatic Division
Richland, Michigan 49083
269-629-5000