Parker H Series, Installation & Service Instructions Manual

Page: 314 / 344

Publication PSS-UM001A-EN-P – December 2016
3-6 Use Auto Start Mode
Use Custom Confi guration
The Auto Start Mode is recommended to quickly and easily get your
H Series Fieldbus I/O system ‘up and running’. But this mode does
not prevent you from changing the adapter’s default confi guration
after system operation has begun.
For more information on how to write custom confi guration for your
adapter on DeviceNet, see Chapter 4, Confi gure the DeviceNet
Scanner Subnet and Chapter 5, Add the H Series Fieldbus DeviceNet
Adapter to the DeviceNet Scanner’s Scanlist.
IMPORTANT
The adapter’s ADR confi guration for the Subnet modules is reset
when you run Auto Start Mode.
Chapter Summary and What’s Next
Auto Start Mode was discussed in this chapter. Move
on to Chapter 4, Confi gure the DeviceNet Scanner
Subnet or to Chapter 5, Add the H Series Fieldbus
DeviceNet Adapter to the DeviceNet Scanner’s
Scanlist.