Parker Automation Gemini GV6K, Command Reference Manual

Page: 39 / 362

Command Descriptions 37
[
Send Response to Both Communication Ports
Type
Communication Interface
Syntax
<a_><!> [ <command><field1>
Units
n/a
Range
n/a
Default
n/a
Response
n/a
See Also
BOT, PORT, ], ECHO, EOL, EOT, LOCK
Product Rev
GT6K 6.0
GV6K 6.0
The Send Response to All Ports (
[
) command is used to send the response from the command which
follows it to both communication ports. If a syntax error occurs, an error message will be sent to both
communication ports.
NOTE : COM1 refers to the “RS-232/485” or “ETHERNET” connector, and COM2 refers to the “RS-232”
connector.
Example:
[TER ;Transfer TER Status to both communication ports
]
Send Response to Alternate Communication Port
Type
Communication Interface
Syntax
<a_><!> ] <command><field1>
Units
n/a
Range
n/a
Default
n/a
Response
n/a
See Also
BOT, PORT, [, ECHO, EOL, EOT, LOCK
Product Rev
GT6K 6.0
GV6K 6.0
The Send Response to Alternate Port (
]
) command is used to send the response from the command which
follows it to the alternate port from the one selected. If a report back is requested from port COM1, the
response will be sent out port COM2, and vice-versa. If a command is in a stored program, the report will
be sent out the alternate port from the one selected by the
PORT
command. If a syntax error occurs an error
message will be sent to the alternate port from the one selected.
NOTE : COM1 refers to the “RS-232/485” or “ETHERNET” connector, and COM2 refers to the “RS-232”
connector.
Example:
; **********************************************************************
; In this example, we place the "]TAS" statement in a program so that
; we can select the port (in this case, "PORT1" selects COM1) as a
; reference. Otherwise, executing "]TAS" outside of a program sends
; the response to whatever port you are not communicating through.
; **********************************************************************
DEF COM
; Begin definition of program called "COM"
PORT1 ; Select COM1
TER ; Transfer TER Status to port COM1
]TAS ; Transfer TAS Status to port COM2
END ; End program definition
www.comoso.com