Parker Automation Gemini GV6K, Command Reference Manual

Page: 109 / 362

Command Descriptions 107
DSTP
Enable/Disable RP240 Stop Key
Type
Display (RP240) Interface
Syntax
<a_><!>DSTP<b>
Units
b = enable bit
Range
b = 1 (enable) or 0 (disable)
Default
1 (enable)
Response
DSTP *DSTP1
See Also
DLED, [ DREAD ], [ DREADF ]
Product Rev
GT6K 6.0
GV6K 6.0
Use the
DSTP
command to enable or disable the stop key on the RP240 panel.
DVAR
Display Variable on RP240
Type
Display (RP240) Interface
Syntax
<a_><!>DVARi,<i>,<i>,<i>
Units
See below
Range
n/a
Default
See below
Response
n/a
See Also
[ DREAD ], [ DREADF ], DVARB, DVARI, DWRITE, VAR
Product Rev
GT6K 6.0
GV6K 6.0
Use the
DVAR
command to display a numeric variable on the RP240's LCD at the current cursor location:
1st
i
= Variable number [Range 1-225]
2nd
i
= Number of whole digits displayed (left of decimal point) [Range 0-9]
3rd
i
= Number of fractional digits displayed (right of decimal point) [Range 0-8]
4th
i
= Sign bit: 0 = no sign displayed, 1 = d or -
Example
:
VAR2=542.14 ; Assign the value 542.14 to variable #2
DVAR2,6,3,1 ; Display variable #2 as +000542.140
DVAR2,3,1,0 ; Display variable #2 as 542.1
DVAR2,3,,1 ; Display variable #2 as +542
DVARB
Display Binary Variable on RP240
Type
Display (RP240) Interface
Syntax
<a_><!>DVARBi,<i>
Units
See below
Range
n/a
Default
See below
Response
n/a
See Also
DVAR, DVARI, DWRITE, VARB
Product Rev
GT6K 6.0
GV6K 6.0
Use the
DVARB
command to display a binary variable on the RP240’s LCD at the current cursor location:
1
st
i
= Variable number [Range 1-125]
2
nd
i = Number of bits displayed [Range 1-32]
Example
VARB2=b11001X11 ; Assign the value 11001X11 to binary variable #2
DVARB2,6
; Display binary variable #2 as 1100_1X
DVARB2,3 ; Display binary variable #2 as 110
DVARB2,1 ; Display binary variable #2 as 1
www.comoso.com