Setting the “ADJ. to Media” (Windows Only)
Macintosh
Windows
Basics
Basics
72
1
Press
MENU/EXIT (PAUSE)
button on the printer panel
.
2
Press
(CONTINUE)
button until
ADJ. to Media
menu is displayed.
3
Press
ENTER
button.
4
Press
(CONTINUE)
or
(CANCEL)
button to select your desired media: Plain
Paper, Thin Paper, Transparency, Label, Coated Paper, Thick Paper/Card or
Envelope.
5
Press
ENTER
button.
6
!
When solid color print for red, green and blue are not printed out evenly in the
ADJ. to Media test pattern (
see “Ex. 1” on page 71
):
Select
+1
value by pressing
(CONTINUE)
button and press
ENTER
button.
"
Print out the test pattern corresponding to the media size and examine the
print quality.
If the print quality does not improve, repeat steps 1 to 6 above to select a
suitable value by incr values.
—
OR —
!
When black, cyan and magenta half tone have weak color areas (
see “Ex. 2”
on page 71
):
Select
-1
by pressing
(CANCEL)
button and press
ENTER
button.
"
Print out the test pattern corresponding to the media size and examine the
print quality.
If the print quality does not improve, repeat steps 1 to 6 above to select a
suitable value by increasing – values.
Setting the ADJ. to Media
Menu Mode
ADJ. to Media
ADJ. to Media
Plain Paper
