Panasonic WJHD500A - Digital Disk Recorder, Operating Instructions Manual

Page: 95 / 206

95
●
Zooming Single Spot (Playback)
While the image on the monitor screen is displayed in
Single Spot mode, the image can be zoomed following the
procedure below.
1. Select an image to be zoomed on the monitor by press-
ing a numeric button (1 - 16) .
The indicator in the selected button lights up and the
camera image corresponding to the button appears on
the monitor screen.
2. Press the EL-ZOOM button to display the zoomed
image on the monitor.
3. In the zoom mode, pressing the
C
,
D
,
A
, or
B
button
will move the image in the direction of the button.
4. Pressing the
+
or
-
button will zoom the image as
shown below.
+
: Increases zoom in steps (x2 → x4 → x8)
-
: Decreases zoom in steps (x8 → x4 → x2)
5. To cancel this mode, press the EL-ZOOM button to
return to the image previously shown.
■
Display on the Monitor
The procedures described below are an example display-
ing the playback on the Multiscreen Monitor.
●
Single and Multiscreen Spot (Playback)
1. Select the group to be played back by pressing the
GROUP SELECT button.
2. Pressing the PLAY/PAUSE button will play back the
most recent recording in the forward direction.
The selected group images appear with the minimum
segment screen on the monitor.
(
B
) and recording number appear on the monitor
screen to indicate that playback is selected.
Note: When the ALARM SEARCH button is on, the Disk
Recorder plays back for alarm and emergency
recording on the Hard Disk.
3. Pressing the MULTISCREEN SELECT button will tog-
gle the display with the segments as shown below.
• Segments assigned to channels where no recording
takes place appear blacked out.
4. To display the image in single spot mode, select a
numeric button (1 - 16) corresponding to the image to
be displayed.
The selected image will be displayed on the monitor.
2
EL-ZOOM
B
PLAY/ PAUSE
y
MULTISCREEN
SELECT
Minimum Screen Segment 4
16 13 10 9 7