Panasonic WJHD500A - Digital Disk Recorder, Operating Instructions Manual

Page: 83 / 206

83
●
Multiscreen Spot (Live)
The monitor can display the camera images on a 4, 7, 9,
10, 13 and 16 multiscreen shown below.
1. Select the input for all groups (or one group) by press-
ing the GROUP SELECT button.
Pressing this button toggles the group display on the
monitor as shown below.
G1: Group 1
G2: Group 2
G3: Group 3
G4: Group 4
none: All Inputs
Note: Select All Inputs for displaying all camera
images, otherwise only camera images assigned to
a group are displayed on the monitor.
2. Select the screen segments to be displayed on the
monitor by pressing the MULTISCREEN SELECT but-
ton repeatedly.
Each time the MULTISCREEN SELECT button is
pressed, the next group of 6 multiscreens available is
displayed as follows.
The display pattern varies according to the selected
input and setting; shown below is an example of a mon-
itor display.
<All Input Display with Quad Shift Off>
GROUP
SELECT
MULTISCREEN
SELECT
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
1
2 3
4 5
6 7 8 9
10 11 12 13
1 2
3 4 5 6
7 8 9 10
1 2
3
4 5
6 7
1 2 3
4 5 6
7 8 9
1
3
2
4
The indicator in the numeric button lights up and the
camera image corresponding to the button appears on
the monitor screen.
4. During the sequence, press the SEQUENCE button to
pause the sequence that is being run on the monitor
screen.
The indicator in the button blinks to indicate that the
sequence is paused.
5. Press the SEQUENCE button to restart the sequence
forward from the step that was previously paused by
pressing the SEQUENCE button.
The indicator in the button changes to a steady light.
6. To return to Spot monitoring, select an assigned cam-
era image to be displayed on the monitor by pressing a
numeric button.
If you attempt to press any button other than the one
assigned to the group, it will be ignored.
Notes:
• You can also enable the Auto Skip function to skip
any steps when no video signal is present.
Refer to the AUTO SKIP in the 5 - 1 SEQUENCE
SETUP for further details.
• The setting can be adjusted in such a way that the
sequence step for displaying an image on the Spot
Monitor screen in the single spot mode can be
skipped automatically.
Refer to the SECRET VIEW in the 5 MULTIPLEXER
SETUP for further details.
SEQUENCE