Panasonic WJHD500A - Digital Disk Recorder, Operating Instructions Manual

Page: 55 / 206

55
7. Move the cursor to the DYNAMIC REC parameter by
pressing the
D
or
C
button, then select the recording
pattern for post-recording by pressing the
+
or
-
but-
ton.
OFF: Records the images assigned to group inputs,
including the one that has activated the alarm (the
same as pre-recording).
ALM-ONLY: Records the particular image that has acti-
vated the alarm.
The factory default setting is OFF.
8. Move the cursor to the AUTO COPY parameter by
pressing the
D
or
C
button, then select alarm backup
mode by pressing the
+
or
-
button.
OFF: Disables alarm data backup.
ON: Enables alarm data backup.
The factory default setting is OFF.
9. Press the SETUP/ESC button to return to the previous
program number menu.
■
One Shot Recording (Internal Timer)
As described before, the One Shot Recording is an event
recording function reacting to an alarm input.
It records the number of particular images that have acti-
vated the alarm.
These items let you determine the recording parameters for
One Shot Recording assigned in the program number
menu.
(continued from Program Timer)
1. Select the recording mode O/S in the program number
menu by pressing the
+
or
-
button, then press the
SET button.
The selected One Shot Recording menu as shown
below appears on the monitor screen.
2. Move the cursor to the TRIGGER ACTION parameter in
the menu by pressing the
D
or
C
button, then select
an active mode for group cameras when an alarm is
received by pressing the
+
or
-
button.
REC+ALM: Enables alarm recording and alarm activa-
tion.
REC: Enables only alarm recording.
The ALARM display on the monitor is also disabled.
The factory default setting is REC+ALM.
3. Move the cursor to the REC RATE parameter in the
menu by pressing the
D
or
C
button, then select the
desired recording rate by pressing the
+
or
-
button.
1 - 60FPS: Records the selected number of the freeze
image per second.
The factory default setting is 15FPS.
Notes:
• The maximum recording rate depends on the
selected parameters in the COMMON SETUP menu
as shown in the table.
FIELD/FRAME CAMERA GENLOCK REC RATE
FIELD ON 60FPS
OFF 30FPS
FRAME 3DIM ON 10FPS
ON OFF 10FPS
FRAME 3DIM ON 30FPS
OFF OFF 15FPS
• “FPS” indicates as field per second or frame per
second when the FIELD/FRAME parameter is set to
FIELD or FRAME in the menu.
4. Move the cursor to the REC QUALITY parameter by
pressing the
D
or
C
button, then select the desired
image quality by pressing the
+
or
-
button.
SUPER FINE: For enhanced sharpness (Compression
Rate 1/6)
FINE: For fine image quality (Compression Rate 1/10)
NORMAL: For normal image quality (Compression Rate
1/16)
EXTENDED: For extended time recording quality
(Compression Rate 1/25)
The factory default setting is SUPER FINE.
5. Move the cursor to the PICTURE parameter by pressing
the
D
or
C
button, then select the number of freeze
images to be recorded by pressing the
+
or
-
button.
4 to 60: Records the selected number of freeze images
for One Shot Recording.
The factory default setting is 16.
6. Move the cursor to the AUTO COPY parameter by
pressing the
D
or
C
button, then select an alarm back-
up mode by pressing the
+
or
-
button.
OFF: Disables backup for alarm recording.
ON: Enables backup for alarm recording.
The factory default setting is OFF.
7. Press the SETUP/ESC button to return to the previous
program number menu.
3-1-1-1 PROG1-NO1-G1 REC SETUP
O/S(EVENT:ONE SHOT)
TRIGGER ACTION REC+ALM
REC MODE
REC RATE 15FPS
REC QUALITY SUPER FINE
PICTURES 16
AUTO COPY OFF