69
Web Browser
Using Web Browser allows you to access a remote recorder, monitor live video images and search recorded
video anytime from virtually anywhere.
Start Internet Explorer on your local PC. You can run the Web Browser by entering the following information
in the address field.
“http://IP address :port number” (The recorder’s IP address and the Web Browser port number (default:
12088) set in the Network setup screen (Web Browser tab))
Note: You will need to get the appropriate IP address for the recorder you want to connect to and
the Web Browser port number from your network administrator.
Enter the “User”, “Password” and the appropriate port numbers of
the program. And then click “OK”.
You will need to enter the recorder’s IP address in the ADDRESS
field when running the Web Browser.
Note: The port numbers for “Watch”, “Search”, “Audio” and
“Status” should be the same port numbers used for set
on the Port Number Setup screen. (Refer to “Chapter 3
-- Configuration - Network setup”.
Note: The maximum number of accessible users to the recorder simultaneously is the following :
Watch : 4 users (including 1 Audio user)
Search : 2 users
Status : 2 users
When running the updated Web Browser program for the first time, Internet Explorer might
occasionally load the information of the previous version. In this case, delete the
temporary internet files by selecting Tools
Internet Options
General tab, and then run
Web Browser program again.
There might be a problem that the bottom of web browser page is cropped due to the
address or status bars in Microsoft Internet Explorer. In this situation, it is recommended
that websites open windows without address or status bars by changing the internet
setting. (Go to the Tools
Internet Options
Security tab
Click the “Custom level…”
button
Select “Enable” for the “Allow websites to open windows without address or
status bars” option)
When running web browser in the Microsoft Windows Vista operating system, it is
recommended to start Internet Explorer with elevated administrator permissions. Click the
right mouse button on the Internet Explorer icon and select the “Run as administrator” option
from the context menu. Otherwise, some functions of the Web Browser program might be
limited to use.
There might be a problem with screen display or screen update due to low image
transmission speed when using the Microsoft Windows Vista operating system. In this
situation, it is recommended that you disable the Auto Tuning capability of your computer.
Run the “Command Prompt” with elevated administrator permissions (Go to the Start
Menu
Accessories
Command Prompt
Click the right mouse button and select
the “Run as administrator” option). Then enter “netsh int tcp set global
autotuninglevel=disable” and hit the enter key. Restart your computer to apply the
changes.
If you want to enable the Auto Tuning capability again, enter “netsh int tcp set global
autotuninglevel=normal” after running the Command Prompt with elevated administrator
permissions. Restart your computer to apply the changes.
Summary of Contents for WJ-HL204/G
Page 77: ...76 Map of Screens ...
