62
Note: Actual play-back speed might varies from desired Play-back speed setting in slow play
mode, in case play-back video clip was recorded at 1 ips through 3 ips.
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image
Play
Go to the next image
Fast backward play
Fast forward play
Selecting “ ” in the top-left corner exits the Record Table Search screen.
Calendar Search
Days with recorded video display on the calendar with
white numbers. You can highlight the days with
recorded video by using the arrow buttons. Once you
have highlighted a day, press the (Play/Pause)
button to select it.
A time bar displays at the bottom of the calendar.
Hours in which video was recorded will be highlighted
with blue. You can use the Up and Down arrow buttons
to highlight the time bar. Once the time bar is
highlighted, you can select the time by using the Left
and Right arrow buttons.
Figure 103 : Calendar Search screen
Note: The time bar is in one-hour segments. If a segment is highlighted, it means that some video
was recorded during that hour. However, it does NOT mean video was recorded for the
entire hour.
If the recorder’s time and date have been reset to a time that is earlier than some recorded video, it is
possible for the recorder to have more than one video stream in the same time range. Move to “Select a
Segment”, and select the video stream you want to search. Refer to the “Appendix D – Time Overlap” for
further information on searching time-overlapped video streams.
Note: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight “Go” and press the button. The
selected date and time will display.
Note: It is possible that no recorded image displays on the current screen. Press the
[MULTISCREEN] button and change to multi-screen. You will be able to easily see the
camera have recorded video during target time.
Motion Search
The “Motion Search” can be selected from the Search
menu while the recorder displays the camera full
screen. The “Motion Search” screen displays a list of
motion events. Use the arrow buttons to highlight the
event for which you would like to see video and press
the (Play/Pause) button to display the video
associated with the selected event on the small search
screen.
Highlighting “Close” and pressing the button will
extract the video associated with the Motion event and
display the first image of the event. Pressing the
button will start playing the “event” video segment.
Pressing [PLAYBACK] returns to live monitoring.
Figure 104 : Motion Search screen
Summary of Contents for WJ-HL204/G
Page 77: ...76 Map of Screens ...
