60
Event Log Search
The recorder maintains a log of each time the Alarm
Input Terminal is activated. The “Event Log Search”
screen displays this list. Use the arrow buttons to
highlight the event for which you would like to see
video.
The “Event Log Search” screen can also be accessed
by pressing the [ALARM] button unless there is an
alarm. There is no determined user authority to display
the “Event Log Search” screen, however, the event
video will not be played unless a user with Search
authority logs into the system.
Figure 99 : Event Log Search screen
Pressing the (Play/Pause) button will extract the event video and display the first image of the event.
Pressing the button will start playing the “event” video segment. Pressing [PLAYBACK] returns to live
monitoring.
Note: It is possible that no recorded image displays on the current screen. Press the
[MULTISCREEN] button and change to multi-screen. You will be able to easily see the
camera have recorded video during target time.
You can also narrow your event search by selecting the “Option…” button and setting up the new search
condition.
You can search video from the first to last recorded
images, or you can set the start and stop times and
dates.
Highlight the box beside “From” and press the
button to toggle between On and Off. When set to Off,
you can enter a specific Date and Time. When set to
On, the search will be from the first recorded image.
Highlight the box beside “To” and press the button to
toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the
search will be from the last recorded image.
Figure 100 : Event Log Search Option screen
Highlight the box beside “Check Time Overlap” and press the button. It toggles between On and Off. You
will only be able to turn the “Check Time Overlap” on or off if a user-defined date and time is set to “From” and
“To”. If the recorder’s date and time have been reset, it is possible for the recorder to have more than one
overlapping start and stop time. When set to On, you will be asked to select one of the overlapping start and
stop time. When set to Off, the recorder will display search results from all start times to all stop times.
Highlight the box beside “Alarm-In” and press the button. You can select the alarm inputs that you want to
include in your search.
Highlight the box beside “Motion” and press the button. You can select the cameras for which you want
any reports of motion detection.
Highlight the box beside “Video Loss” and press the button. You can select the cameras for which you
want any reports of lost video.
Highlight the box beside “Video Blind” and press the button. You can select the cameras for which you
want any reports of blind video.
Highlight the box beside “Record Channels” and press the button. You can select the cameras that you
want to search for any reports of event recorded data. The recorder will display the events (not the camera
channels) that occurred and that also are recorded on the camera channel that you selected. If you do not
Summary of Contents for WJ-HL204/G
Page 77: ...76 Map of Screens ...