Panasonic WJ-HDB502, User Manual

Page: 14 / 46

14
WJ-HD500 SETUP
When the WJ-HDB502 Network Board is installed in the WJ-
HD500 Disk Recorder, it is enabled setup the WJ-HD500
SETUP menu from the PC in the network
On the
MAIN CONTROL PANEL window, clicking the
[HDB500 MENU] button will display the user ID and pass-
word dialog box.
Enter your user ID and password in the dialog box.
The
WJ-HD500 SETUP MENU
window shown in the figure
will appear on the display.
Note: When the access is made from the PC that is previ-
ously registered host with the host authorization, the
WJ-HD500 SETUP MENU window will automatically
appear on the display.
If the registration is not completed yet, enter the default
user name and password as shown below.
User Name: admin
Password: nil (not required)
■
Programming Setup Window
As shown in the figure, the WJ-HD500 SETUP MENU win-
dow has eight main submenus. Seven of these are further
divided into additional submenus.
The display underlined indicates that the item has a sub-
menu for more detailed setups.
■
Timer Setting
The timer recording mode is triggered by the internal or an
external timer.
This item lets you enable or disable the timer for recording.
Select a parameter to be activated by clicking the pulldown
list.
INT: Selects the internal timer for recording as sched-
uled in the programmed menu.
EXT: Selects the external timer for recording when
detecting power on and off.
OFF: Timer recording is disabled.
To record manually, set to this mode.
The factory default setting is OFF.
Note: When the parameter is set to something other
than OFF, the Disk Recorder does not start record-
ing even if the REC button is pressed.