Panasonic Toughbook CF-18 Series Reference Manual Download Page 87

Page: 87 / 147

<Only for models with wireless LAN>

Wireless LAN

Select the profile you have set and select [Connect].

If the setting of the profile that is currently connected is changed, the new setting
will not be enabled until you select the profile and then select [Connect].

NOTE

is displayed, the computer is connecting to an access point. Wait for a

moment.

is displayed for a longer time, perform the following procedure.

Display [Intel PROSet/Wireless] screen. (

page 86

)

Select again a profile name you want to connect, and select [Connect].

Select [Close].

NOTE

For more information about how to use the Intel

PROSet/Wireless Software, refer to

[Help] in the menu bar.

Summary of Contents for Toughbook CF-18 Series




















































































































































Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands

Panasonic Toughbook CF-18 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands