127
Dealing with Problems (Advanced)
The screen becomes disordered
z
The screen display may become distorted if the resolution or number of colors
is changed, or if an external display is connected or disconnected while the
computer is operating. Restart the computer.
The external display no longer
displays properly
z
When an external display not compatible with the power saving mode is used
with the computer, the display may not function correctly when the computer
enters the power saving mode. In such cases, turn off the power to the external
display.
When you want to display the fonts or
icons at a larger size
z
Change the size of the icons, etc. using "Icon Enlarger" (
).
z
To enlarge a part of the screen, use Loupe Utility (
During simultaneous display, one of
the screens becomes disordered
z
Try changing the display by pressing
Fn
+
F3
.
z
If you continue to experience problems, try changing the display destination in
the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver
for Mobile] - [Devices]
z
When the [Command Prompt] is set to "Full Screen" by pressing
Alt
+
Enter
,
the picture is displayed on one of the screens only. When the window display is
restored by pressing
Alt
+
Enter
, the picture is displayed on both screens.
z
Simultaneous display cannot be used until Windows startup is complete (during
Setup Utility, etc.). When
Fn
+
F3
is pressed, the screen is displayed on the
external display or internal LCD.
When a video such as an MPEG file is
being played with Windows
®
Media
Player, the display destination cannot
be switched using
Fn
+
F3
z
The display destination cannot be switched while a video such as an MPEG file
is playing. Stop playing the video before switching the display destination.
When the screensaver is set, an error
occurs during a resume operation
z
When the computer automatically enters the standby or hibernation mode while
the screensaver is running, an error may occur during a resume operation. In
such cases, turn off the screensaver or try changing the pattern of the
screensaver.
Setup Utility
[Enter Password] is displayed
z
Enter the Supervisor Password or User Password. If you have forgotten it,
contact Panasonic Technical Support.
Display
