Panasonic Toughbook CF-18 Series Reference Manual Download Page 56

Page: 56 / 147

SD Memory Card

Removing the Card

CAUTION

Do not remove a card while your computer is in the standby or hibernation mode.

Save important data and close each application.

Confirm the SD Memory Card indicator (C) turns off completely.

Disable the card function.

Double-click

on the taskbar.

Select [Secure Digital Storage Device], then select [Stop].

Follow the on-screen instructions.

This step is not necessary when removing the card after the computer is turned off.

When you press the card, it will come out of the slot a little bit. Now
pull it all the way out.

If you try to force the card out of the slot while it is locked in place, the card or
slot may be damaged.

Summary of Contents for Toughbook CF-18 Series




















































































































































Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands

Panasonic Toughbook CF-18 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands