Panasonic Toughbook CF-18 Series Reference Manual Download Page 103

Page: 103 / 147

103

Setup Utility

NOTE

The Setup Utility screen cannot be displayed in simultaneous display.
By pressing

, display destinations can be changed either external display or

the internal LCD.

When [Password on boot] in the Setup Utility is set to [Disable]:
• When the computer is started up, entering a password is not necessary.
• When the Setup Utility is started up:

The password becomes necessary. This alternative can prevent the contents of the
Setup Utility from being changed.

If you fail to press

at the right moment, the Setup Utility will not start up. In this

case, let the computer fully boot up, and then perform a shutdown or restart from
Windows.

To close the Setup Utility:

Press

Esc

Select the exiting method from the [Exit] menu and press

Enter

Select [Yes] and then press

Enter

Summary of Contents for Toughbook CF-18 Series




















































































































































Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands

Panasonic Toughbook CF-18 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands