Panasonic Toughbook CF-18 Series Reference Manual Download Page 108

Page: 108 / 147

108

Setup Utility

NOTE

[Advanced] menu cannot be changed when the Setup Utility is started up with the
User Password.

Only for models with wireless LAN.

Advanced Menu

(An underline indicates the factory default settings)

Digitizer

• Select whether to use [Digitizer] ([Enable]) or not ([Disable]).

Disable
Enable

Modem

• Select whether to use the internal modem function ([Enable]) or not ([Disable]). (This does not

work for the external modem.)

Disable
Enable

LAN

• Select whether to use the internal LAN function ([Enable]) or not ([Disable]).

(This does not work for the external LAN card.)

Disable
Enable

Wireless LAN

• Select whether to use the internal wireless LAN function ([Enable]) or not ([Disable]). (This does

not work for the external wireless LAN card.)

Disable
Enable

Legacy USB Support

• Select whether to use the function that makes the computer recognize USB keyboard, USB

floppy disk drive and USB CD/DVD drive ([Enable]) or not ([Disable]) before starting Windows.

Disable
Enable

Summary of Contents for Toughbook CF-18 Series




















































































































































Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands

Panasonic Toughbook CF-18 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-18 Series

Reviews:

Related manuals for Toughbook CF-18 Series

Brands by name

Popular brands