138
Dealing with Problems (Advanced)
Unable to read/write to the hard disk
z
Your drive or file may not have been properly set.
z
Check to see if the hard disk is full. If it is full, delete unnecessary files.
z
You cannot use a hard disk drive for which [Enable] has been selected in the
[Hard Disk Lock] setting of the Setup Utility by another computer.
z
Your hard disk content may be corrupted. Contact Panasonic Technical
Support.
When the previous item is not the
cause
z
Try testing another drive or media.
Touch Pad / Digitizer
The cursor cannot be controlled
properly
z
If you are using an external mouse, ensure that the external mouse has been
connected correctly.
z
Restart the computer by using the keyboard.
(Press ,
U
, and select [Restart] with
R
.)
z
If the computer does not respond to keyboard commands, read "No response"
(
Unable to input using the touch pad
z
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
z
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad
may not be used.
z
Has the touch pad driver been properly installed?
Unable to use the digitizer function
z
Has the Setup Utility been used to set [Digitizer] to [Enable]?
z
You can use only the pen included with the computer to use the digitizer
function.
z
It is necessary to perform [Calibration] to point correctly with the pen included
with the computer. (
Sound
The sound is not heard
z
Try changing the mute by pressing
Fn
+
F4
or
Fn
+
F6
.
Volume does not change when
Fn
+
F5
or
Fn
+
F6
is pressed
z
If the Windows sound function is not active, the volume will not change even if
is displayed.
The audio is distorted
z
Audio distortion may occur when operations are performed by pressing
Fn
in
combination with another key. Stop playing and start again.
Disk Operations
