Panasonic Switch-M12PWR, Operation Manual

Page: 215 / 240

215
4
4
.
.
9
9
.
.
3
3
.
.
S
S
y
y
s
s
t
t
e
e
m
m
R
R
e
e
b
b
o
o
o
o
t
t
On the Switch Tools Configuration Menu, pressing "R" opens the System
Reboot Menu as shown in Fig. 4-9-5. On this screen, you can reboot this
Switching Hub.
Fig. 4-9-5 System Reboot
Screen Description
Reboot Status Displays whether or not the reboot command is executed.
Stop
Displays that the reboot command is not
executed.
Reboot Type Displays the reboot type. The factory default setting is "Normal."
Normal
Normal reboot is executed.
Factory Default All settings are reset to factory default.
Factory Default
Except IP All settings except the IP address are reset to
factory default.
Reboot Timer Displays the time between execution of the reboot command and
actual reboot. The factory default setting is 0 seconds.
Time Left Displays the time left before the system actually reboots after
execution of the reboot command. A key entry refreshes the
screen display, allowing you to check the elapsed time.
PN23129K/PN23129A Local Management System
Switch Tools Configuration -> System Reboot Menu
Reboot Status: Stop
Reboot Type: Normal
Reboot Timer: 0 seconds
Time Left: N/A
-------------------------------- <COMMAND> -----------------------------------
Set Reboot [O]ption
Start [R]eboot Process
Set Reboot [T]imer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option