Panasonic Switch-M12PWR, Operation Manual

Page: 218 / 240

218
4
4
.
.
9
9
.
.
5
5
.
.
P
P
i
i
n
n
g
g
E
E
x
x
e
e
c
c
u
u
t
t
i
i
o
o
n
n
On the Switch Tools Configuration Menu, pressing "P" opens the Ping
Execution screen as shown in Fig. 4-9-7. On this screen, you can execute the
ping command from the Switching Hub to confirm communications with
connected terminals and other devices.
Fig. 4-9-7 Ping Execution
Screen Description
Target IP Address: Displays the IP address of the target of the ping. The factory
default setting is 0.0.0.0.
Number of
Request Displays the number of times of ping. The factory default setting is
10 times.
Timeout Value Displays the time before timeout occurs. The factory default setting
is 3 seconds.
Result Displays the ping result.
Available commands are listed below.
I Set the IP address of the target of the ping.
Press "I." The command prompt changes to "Enter new Target IP Address >."
Enter the IP address.
N Set the number of times of ping.
Press "N." The command prompt changes to "Enter new Request Times >." Enter
the number of times between 1 and 10.
T Set the time before timeout occurs.
Press "T." The command prompt changes to "Enter new Timeout Value >." Set
the time between 1 to 5 seconds.
E Execute the ping command. Or, clear the display.
PN23129K/PN23129A Local Management System
Switch Tools Configuration -> Ping Execution
Target IP Address: 0.0.0.0
Number of Requests: 10
Timeout Value: 3 Sec.
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address [E]xecute Ping
Set [N]umber of Requests [S]top Ping
Set [T]imeout Value [Q]uit to previous menu
Command>
Enter the character in square brackets to select option