Panasonic Switch-M12PWR, Operation Manual

Page: 71 / 240

71
4.6.8.e Displaying MAC address table by VLAN
On the Forwarding Database Information Menu, press "V." The command
prompt changes to "Enter VLAN ID>." Specifying a port number opens the
Display MAC Address by VLAN ID screen as shown in Fig. 4-6-21. In this
screen, you can display MAC Address table by VLAN.
Fig. 4-6-21 Displaying MAC address table by VLAN
Screen Description
Age-Out Time: Displays a time to store MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5
minutes).
Select VLAN
ID: Displays the selected VLAN ID.
MAC Address Displays a MAC address in MAC address table.
Port Displays a port to which the MAC address has belonged.
Available commands are listed below.
N Display the next page.
Press "N" to display the next port.
P Display the previous page.
Press "P" to display the previous port.
A Set a time to store MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Out
time with a value of 10 to 1000000 by seconds.
S Switch VLAN to be displayed.
PN23129K/PN23129A Local Management System
Forwarding Database Menu -> Display MAC Address by VLAN ID
Age-Out Time: 300 Sec. Selected VLAN ID:1
MAC Address Port
----------------- ----
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [S]elect VLAN ID
[P]revious Page [Q]uit to previous menu
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option