manualshive.com logo in svg

Panasonic PT-REQ12 Series, Operating Instructions Manual, Page: 93 / 306

Share
Download
Panasonic PT-REQ12 Series Operating Instructions Manual Download Page 93

Chapter 4

 

Settings — Menu navigation

ENGLISH - 93

 

f

Sub-menu items and factory default settings vary depending on the selected input terminal.

 

f

The [NETWORK] menu 

→

 [NFC SETTING] is displayed when the NFC function is enabled.

The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that there are some 

models that have the NFC function enabled from the time of factory shipment, and there are some countries or regions where the NFC 

Upgrade Kit cannot be applied.

For the availability of the NFC function in the country or region where you purchased the product, visit the following website or consult your

dealer.

https://panasonic.net/cns/projector/

Summary of Contents for PT-REQ12 Series



















































































































































































































































































































Reviews:

No comments