Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 177
Conversion formula for [CONSOLIDATED RUNTIME]
A
x 1.0 +
B
x 0.8
f
A
: Runtime of the light source with [OPERATING MODE] set to [NORMAL], [QUIET], [USER1], [USER2], or [USER3]
f
B
: Runtime of the light source with [OPERATING MODE] set to [ECO]
r
[DETAILED INFORMATION]
[INPUT]
Displays the input used for the projected image.
[SIGNAL FORMAT]
Displays the format of the input signal.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[SCAN TYPE]
Displays the scan type of the input signal.
[TOTAL DOTS]
Displays the total dot count of the input signal.
[DISPLAY DOTS]
Displays the number of input signal display dots.
[TOTAL LINES]
Displays the total line count of the input signal.
[DISPLAY LINES]
Displays the number of input signal display lines.
[SAMPLING]
Displays the sampling information and the color format of the input signal.
[BIT DEPTH]
Displays the gradation of the input signal.
[SIGNAL LEVEL]
Displays the signal level of the input signal.
[COLORIMETRY]
Displays the color gamut information of the input signal. The content of display is as follows.
[ITU-2020]: When the color gamut is compliant with ITU-R BT.2020 standard
[ITU-709]: When the color gamut is compliant with ITU-R BT.709 standard
[SMPTE 170M]: When the color gamut is compliant with SMPTE 170M standard
[---]: When there is no signal, when the color gamut information is not included in the InfoFrame
information, or when the color gamut information other than [ITU-2020], [ITU-709], or [SMPTE 170M] is
included
[HDCP STATUS]
Displays the HDCP status of the input signal. The content of display is as follows.
[HDCP2.X]: When protected with HDCP 2.2 or HDCP 2.3
[HDCP1.X]: When protected with HDCP 1.X
[NONE]: When not protected with HDCP
[---]: When there is no signal
[SDI ERROR STATUS]
Displays the error status of the SDI input.
r
[CONTENT INFORMATION]
[EOTF]
Displays EOTF (Electro-Optical Transfer Function) out of the InfoFrame information added to the input
signal.
[MASTERING DISPLAY
COLOR VOLUME]
[RED]
Displays the chromaticity coordinates for the primary color red out of the
InfoFrame information added to the input signal.
[GREEN]
Displays the chromaticity coordinates for the primary color green out of
the InfoFrame information added to the input signal.
[BLUE]
Displays the chromaticity coordinates for the primary color blue out of the
InfoFrame information added to the input signal.
[WHITE]
Displays the chromaticity coordinates for the white point out of the
InfoFrame information added to the input signal.
[MAX LUMINANCE]
Displays the maximum brightness out of the InfoFrame information added
to the input signal.
[MIN LUMINANCE]
Displays the minimum brightness out of the InfoFrame information added
to the input signal.
[CONTENT LIGHT LEVEL]
[MaxCLL]
Displays MaxCLL (Maximum Content Light Level) out of the InfoFrame
information added to the input signal.
[MaxFALL]
Displays MaxFALL (Maximum Frame Average Light Level) out of the
InfoFrame information added to the input signal.
Note
f
If any abnormality has occurred on the projector, press the <DEFAULT> button while the
[STATUS]
screen is displayed to check the details
of the error information.
f
For details on the contents displayed in [SELF TEST], refer to “Self-diagnosis display” (
x
page 265).
f
The values displayed in [ANGLE INFORMATION] are based on the results of the angle sensor detection and may differ from the actual tilt
angle of the projector. The displayed values are for reference only and accuracy is not guaranteed.
