Chapter 5
Operations — Using HDMI CEC function
250 - ENGLISH
Using HDMI CEC function
HDMI CEC function allows to operate the CEC-compatible device with the projector remote control and allows the
power on/off link operations between the projector and CEC-compatible device.
Connecting a CEC-compatible device
Connect a CEC-compatible device to the <HDMI IN 1> terminal, <HDMI IN 2> terminal or Function Board.
Connection example with CEC-compatible device
Setting the projector and CEC-compatible device
Before using the HDMI CEC function, you need to configure the settings on the projector and the CEC-compatible
device.
f
CEC-compatible device: enable the HDMI CEC function.
f
Projector: Set the [PROJECTOR SETUP] menu
→
[HDMI CEC] to [ON]. (
x
page 181)
Note
f
After switching on the CEC-compatible device, switch on the projector and select HDMI1 input, HDMI2 input or SLOT input, then check that
the image from the CEC-compatible device is projected correctly.
Operating the CEC-compatible device with the projector remote control
You can operate the device using the projector remote control by calling up the operation menu of the CEC-
compatible device from the HDMI CEC operation screen. Use the number buttons (<2>, <4>, <6>, <8>) on the
remote control to select the operation item on the HDMI CEC operation screen.
About the HDMI CEC operation screen, refer to “Operating a CEC-compatible device” (
x
page 181).
2 MENU
(
Device name
)
4 POWER ON
6 POWER OFF
8 RETURN
1
4
2
3
5
HDMI CEC operation screen
1 Displays the device name to be operated.
2 [MENU]
Call up the operation menu of the CEC-compatible device.
3 [POWER ON]
Switch on the device.
4 [POWER OFF]
Switch off the device.
5 [RETURN]
Returns the operation menu of the CEC-compatible device to
the previous screen.
Note
f
If the operation menu of the CEC-compatible device cannot be called up from the HDMI CEC operation screen, change the menu code
setting. For the operation details, refer to “Changing the menu code” (
x
page 182).
f
If you cannot operate the operation menu of a CEC-compatible device, try setting the [PROJECTOR SETUP] menu
→
[HDMI CEC] to [OFF]
and [ON] again. It may be improved.
f
Wireless Presentation System Receiver Board (Model No.: TY-SB01WP) supports the CEC function of the power on/power off link and
the CEC function of input switching with the power link. It does not support the menu operation of the CEC-compatible device using the
projector remote control.
CEC-compatible device
Blu-ray disc player (example)
HDMI cable
(commercially available)
Repeater
CEC-compatible device
Blu-ray disc player (example)
