Chapter 2
Getting Started — Setting up
ENGLISH - 37
Mounting on the ceiling and projecting forward
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
Setting value
Menu item
Setting value
[FRONT/REAR]
[FRONT]
[FRONT/REAR]
[REAR]
[FLOOR/CEILING]
[AUTO] or [CEILING]
[FLOOR/CEILING]
[AUTO] or [CEILING]
Portrait setting and projecting forward
Portrait setting and projecting from rear
(Using the translucent screen)
Menu item
Setting value
Menu item
Setting value
[FRONT/REAR]
[FRONT]
[FRONT/REAR]
[REAR]
[FLOOR/CEILING]
Set in accordance with the image
to project.
[FLOOR/CEILING]
Set in accordance with the image
to project.
Note
f
In the portrait setting, the on-screen menu is displayed sideways.
To display the on-screen menu vertically, go to the [DISPLAY OPTION] menu
→
[ON-SCREEN DISPLAY] (
x
page 116) and change the
[OSD ROTATION] setting.
f
The projector has a built-in angle sensor. The attitude of the projector is automatically detected by setting [FLOOR/CEILING] to [AUTO] in
the [PROJECTOR SETUP] menu
→
[PROJECTION METHOD].
r
Angle sensor
The range of the installation attitude that is detected by the angle sensor built-in the projector is as follows.
30°
30°
Floor standing installation
Ceiling mount installation
Floor standing installation
Projection direction
