ENGLISH - 7
Read this first!
(for Taiwan)
This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.
第
1
類雷射產品
(for India)
This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
CAUTION (North/Middle/South America)
Power Supply:
This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION:
The AC power cord which is supplied with the projector as an accessory can only be used for
power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a
separate 250 V power cord. If you use the accessory cord in such situations, fire may result.
CAUTION (North/Middle/South America/Taiwan)
This equipment is equipped with a three-pin grounding-type power plug. Do not
remove the grounding pin on the power plug. This plug will only fit a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
WARNING (USA and Canada)
f
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
f
For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
f
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
(Under the top slide cover)
(Under the top slide cover)
