Chapter 5
Operations — Using the information monitor function
222 - ENGLISH
4) Press the <ENTER> button.
f
The detailed item is displayed.
f
The network selection item is displayed when [NETWORK] is selected in Step
3)
. Proceed to Step
6)
.
5) Press
as
to switch the item.
f
The display items will switch each time you press the button.
Sub-menu item
Detailed item
Details
[PROJECTOR]
[PROJECTOR ID]
Displays the ID number set to the projector.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[PROJECTOR RUNTIME]
Displays the runtime of the projector.
[LIGHT RUNTIME]
Displays the runtime of the light source 1 and the light source 2.
[INTAKE AIR TEMP.]
Displays the intake air temperature status.
[EXHAUST AIR TEMP.]
Displays the exhaust air temperature status.
[LIGHT1 TEMP.]
Displays the status of the light source 1 temperature of the
projector.
[LIGHT2 TEMP.]
Displays the status of the light source 2 temperature of the
projector.
[SELF TEST]
Displays the self-diagnosis information.
Displays the detailed information when the <ENTER> button is
pressed while error/warning has occurred.
[INPUT]
Displays the currently selected input.
[SIGNAL NAME]
Displays the input signal name.
[ON SCREEN DISPLAY]
Displays the status of on-screen display function. ([ON]: Display;
[OFF]: Hide)
[SHUTTER]
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
[FREEZE]
Displays the status of the freeze function. ([ON]: Paused;
[OFF]: Cleared)
[REMOTE1 STATUS]
Displays the control status of the REMOTE1.
[AC VOLTAGE]
Displays the input supply voltage.
[OPERATING MODE]
Displays the setting value of the [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[OPERATING MODE].
[LIGHT OUTPUT]
Displays the setting value of the [PROJECTOR SETUP] menu
→
[LIGHT OUTPUT].
[INFO MONITOR]
[DEFAULT]
Displays the display setting of the information monitor during normal
status. ([USER VIEW]: Display; [OFF]: Hide)
[INPUT]
Displays the display status of each item during the USER VIEW
mode. ([ON]: Display; [OFF]: Hide)
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[FREEZE]
[OSD]
[IP ADDRESS(WIRED)]
[DIRECTION]
Displays the direction of the text to display in the information
monitor. ([AUTO]: Automatic detection; [NORMAL]: Floor mount;
[FLIPPED]: Inverted upside down)
[BRIGHTNESS]
Displays the setting value of the [PROJECTOR SETUP] menu
→
[INFO MONITOR SETTING]
→
[BRIGHTNESS].
[VERSION]
[FIRMWARE VERSION]
Displays the firmware version of the projector.
6) Press
as
to switch the item.
f
The display items will switch each time you press the button.
[PJ NAME]
Select this item when [PROJECTOR NAME] is to be displayed.
[WIRED LAN]
Select this item when the information of the wired LAN is to be displayed.
[WIRELESS LAN]
Select this item when the information of the wireless LAN is to be displayed.