Chapter 4
Settings — [PICTURE] menu
84 - ENGLISH
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 79) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1) Press
as
to select [PICTURE MODE].
2) Press
qw
.
f
The
[PICTURE MODE]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[STANDARD]
The image becomes suitable for video signals in general.
[CINEMA]
The image becomes suitable for movie contents.
[NATURAL]
The image becomes suitable for using in a relatively dark environment.
[REC709]
The image becomes Rec.709 compliant when the setting other than [PICTURE MODE] is set to the
factory default.
[DICOM SIM.]
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC]
The light output is maximized for use in bright areas.
[GRAPHIC]
The image becomes suitable for computer signal input.
[USER]
Set any desired picture mode.
Note
f
Rec.709 is an abbreviation of “ITU-R Recommendation BT.709” and is a color standard of high-vision broadcasting.
f
DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.
f
If the <ENTER> button is pressed while [PICTURE MODE] is selected, the adjustment condition that is currently set can be saved as the
default setting of the selected picture mode. To save the adjustment condition in [USER] as the default setting, refer to “Saving the default
setting in [USER]” (
x
page 84). The data of all items except [SYSTEM SELECTOR] and [DEFAULT PICTURE MODE] in the [PICTURE]
menu are saved.
f
If the [PICTURE] menu
→
[DEFAULT PICTURE MODE] is set to [AUTO], [GRAPHIC] is automatically selected when a new computer
signal is input and [STANDARD] is automatically selected when a new video signal is input. If the [PICTURE] menu
→
[DEFAULT PICTURE
MODE] is set to anything other than [AUTO], the picture mode set in [DEFAULT PICTURE MODE] is selected when a new signal is input.
Saving the default setting in [USER]
1) Press
as
to select [PICTURE MODE].
2) Press
qw
to select [USER].
3) Press the <ENTER> button.
f
The
[PICTURE MODE]
detailed screen is displayed.
4) Press
as
to select [DEFAULT SETTING SAVE], and press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
f
The adjustment condition is saved as the default setting of the picture mode [USER].
Changing the [USER] name
1) Press
as
to select [PICTURE MODE].
2) Press
qw
to select [USER].
3) Press the <ENTER> button.
f
The
[PICTURE MODE]
detailed screen is displayed.