Chapter 5
Operations — Using the information monitor function
ENGLISH - 219
7) Press
as
to select [IPv4].
8) Press the <ENTER> button.
f
The detailed setting item is displayed.
9) Press
as
to select [DHCP].
f
The current setting is displayed.
10) Press the <ENTER> button.
f
Setting can be changed.
11) Press
qw
to switch the setting item.
f
The items will switch each time you press the button.
[ON]
Select this item when using the DHCP server that exists in the network to which the projector is to be
connected.
IPv4 address is automatically acquired.
[OFF]
Select this item when setting the IPv4 address manually.
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY].
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu
→
[WIRED LAN]
→
[IPv4 SETTINGS]
→
[DHCP]
r
Setting the wired LAN IPv4 address
Set the IP address, the subnet mask, and the default gateway if a DHCP is not used.
1) Press
as
to select [SETUP].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select [NETWORK].
4) Press the <ENTER> button.
f
The network selection item is displayed.
5) Press
as
to select [WIRED LAN].
6) Press the <ENTER> button.
f
The IP setting item is displayed.
7) Press
as
to select [IPv4].
8) Press the <ENTER> button.
f
The detailed setting item is displayed.
9) Press
as
to select [IP ADDRESS], [SUBNET MASK], or [DEFAULT GATEWAY].
f
The current setting is displayed.
10) Press the <ENTER> button.
f
Setting can be changed.
11) Press
asqw
to enter the address.
f
Press
qw
to select the number to change, and press
as
to change the number.
12) Press the <ENTER> button.
f
The setting is reflected.
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu
→
[WIRED LAN]
→
[IPv4 SETTINGS]
→
[IP ADDRESS] / [SUBNET MASK] / [DEFAULT GATEWAY]
f
The number can be entered with the number (<0> - <9>) buttons on the remote control when the projector is in the standby status.
