Panasonic PT-JW130F Page 98 Operating Instructions Manual Download

Page: 98 / 217

Chapter 5

Operations — Memory Viewer function

98 - ENGLISH

The time bar of the operation guide on the lower part of the playback screen can be hidden by setting the [MEMORY VIEWER] menu

→

[GUIDE] (

page 67) to [OFF].

Resume playback

When automatic playback is disabled (the [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 66) is set to [OFF]), resume playback can

be performed.
Resume playback is a function that stops movie playback in the middle and restarts playback from the position where the movie has been

stopped the last time when the same file is to be played back next time.

The following operations resume playback from the position where the last playback has been stopped.

Stopping movie playback in the middle, going back to the Memory Viewer screen, and then selecting the same movie file again and playing

it back

After playing back other movie or still image files, selecting the previous movie file and playing it back

Note

Resume information (information on the position when movie playback is stopped in the middle) is automatically saved at the time when

playback is paused by pressing the <ENTER> button during playback or when full-screen display is ended by pressing the <RETURN>

button during playback.

Resume information (information on the position when movie playback is stopped in the middle) of 50 movie files can be saved. After the

51st movie file is played back, resume information will be deleted in order from the oldest.

When resume playback is performed, some files may not be played back from the correct position where the last playback has been

stopped.

All resume information are deleted if the following operations are performed: switching input to other than Miracast, removing SD card,

setting standby status when the [SETUP] menu

→

[STANDBY MODE] (

page 72) has been [ECO], or turning off the power of the track

system.

Playing back still images/movies automatically when the projector is turned on

When the following three conditions are met, playback of still images/movies starts automatically when the projector is turned on.

Automatic playback is enabled

The [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 66) is set to [ON]

The input is set to Memory Viewer when the power is turned on to start projection

The [SETUP] menu

→

[STARTUP INPUT SELECT] (

page 73) is set to [MEMORY VIEWER]

The [SETUP] menu

→

[STARTUP INPUT SELECT] (

page 73) is set to [LAST USED], and the power is turned off with the input set to

Memory Viewer

There are still image/movie files that can be played back with the Memory Viewer function in the root folder of the SD card

Note

The playback order follows the display order set in the [MEMORY VIEWER] menu

→

[SORT] (

page 66).

Also in the cases where still image and movie files both exist in the same folder, they are played back according to the [SORT] setting.

To play back still image/movie files automatically when the power of the track system is turned on, perform the following setting and

operation.

Set the [SETUP] menu

→

[INITIAL STARTUP] (

page 72) to [ON]

Set the [SETUP] menu

→

[INITIAL STARTUP] (

page 72) to [LAST MEMORY], and turn off the power of the track system during

projection

Direct playback

Still image/movie files in the specified folders of the SD card can be played back by pressing the number (<1> - <6>) buttons on the remote

control. This operation is referred to as direct playback.

Saving files for direct playback

To perform direct playback, still image/movie files must be saved in the specified folders in advance. Saving destinations of files are the folders

in the root directory (top-most directory) of the SD card. Name the folders (4 characters in single byte) corresponding to the number (<1> -

<6>) buttons on the remote control, as indicated in the following table. If the folder name is different, direct playback cannot be performed.

Number button

<1>

<2>

<3>

<4>

<5>

<6>

Corresponding folder name

R001

R002

R003

R004

R005

R006

Performing direct playback

1) Insert the SD card into the SD card slot.

Refer to “Using SD cards” (

page 51) for handling of SD cards.

2) Press the <MEMORY VIEWER> button.

The Memory Viewer screen (thumbnail or list view) is displayed.

Summary of Contents for PT-JW130F


























































































































































































































Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands

Panasonic PT-JW130F, Operating Instructions Manual

Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands