Panasonic PT-JW130F Page 156 Operating Instructions Manual Download

Page: 156 / 217

Chapter 5

Operations — Content Manager

156 - ENGLISH

5) Select a preview mode, and click the [Start] button.

When [WEB browser] is selected, the image is displayed on the web browser.

When [Projector] is selected, the image is displayed on the projection screen.

Note

In the following cases, the projector mode [Projector] is not available.

During signage playback (schedule/slideshow)

When the input is other than signage

When the projection mode is lighting mode

Preview mode [WEB browser]

A preview screen like the following is displayed on the web browser.

Operation icon

Performance

Switches to the previous content.

Stops playback.

Starts or pauses playback. The icon display changes depending on the playback state.

Switches to the next content.

Note

When there is a blank period between contents, the period is handled as one content and displayed in preview.

Regardless of the content setting, each content including blank periods is played for 10 seconds.

In the case of movie/external input content, only an icon is displayed on the preview screen instead of the actual image.

Image effects and color settings are not reflected in preview images.

Preview mode [Projector]

Preview image is displayed on the projection screen.

An operation screen like the following is displayed on the web browser.

Operation icon

Performance

Stops playback.

Starts or pauses playback. The icon display changes depending on the playback state.

Note

When there is a blank period between contents, the period is handled as one content and displayed in preview.

Summary of Contents for PT-JW130F


























































































































































































































Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands

Panasonic PT-JW130F, Operating Instructions Manual

Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands