Panasonic PT-JW130F Page 30 Operating Instructions Manual Download

Page: 30 / 217

Chapter 2

Getting Started — Installing/removing the projector

30 - ENGLISH

Installing/removing the projector

This section describes the mounting method of the projector to the track system and the setting method of the orientation of the main unit.

Before mounting

The track systems compatible for mounting the projector are as follows.

Manufacturer

Nordic Aluminium

Name

GLOBAL Trac Pro tracks

Type No.

XTS4100/XTS4200/XTS4300/XTS4400

Attention

Ensure that track system is installed per manufacturer’s instructions.

Before mounting/removing the projector, turn off the power of the track system.

Mount the projector to the track system which is installed in the horizontal ceiling or beam and can withstand the weight of the projector

(

page 212).

Do not mount the projector to the following track systems.

Track system that is installed in the wall surface or floor

Track system that is installed in the sloping ceiling

Track system that cannot withstand the load

If it is hard to operate the lever on the track mount parts A/B when mounting the projector, remove the projector from the track system

without turning the lever forcibly, displace the projector slightly and mount it again.

Note

The adapter of the projector cannot be mounted to the position of the tapping screw fixing the track system to the ceiling or beam.

When multiple projectors are mounted side by side, the brightness or the color may differ due to individual differences, even when the model

number is the same.

The model number of track system is subject to change without prior notice.

Preparing the adapter cover

1) Attach the string to the adapter cover.

Pass one end (with smaller ring) of the string through the hole of the adapter cover and attach it to the adapter cover as shown in the

figure.

Hole for attaching string

Summary of Contents for PT-JW130F


























































































































































































































Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands

Panasonic PT-JW130F, Operating Instructions Manual

Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands