manualshive.com logo in svg

Panasonic PT-JW130F, Operating Instructions Manual

The Panasonic PT-JW130F Operating Instructions Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and guidelines to ensure seamless operation of the PT-JW130F projector. Easily access and download this user-friendly manual from manualshive.com to make the most of your Panasonic PT-JW130F.

Share
Download
background image

Chapter 6

 

Maintenance — Inspection and maintenance

ENGLISH - 201

Inspection and maintenance

Before maintaining the projector

Attention

 

f

Make sure to turn off the power before maintaining the projector. (

x

 pages 44, 48)

 

f

When switching off the projector, make sure to follow the procedures in “Turning off the projector” (

x

 page 48).

WARNING

Be sure to turn off the power of the track system before maintaining the projector.

Electric shocks can result.

Maintenance

Outer case

Wipe off dirt and dust with a soft, dry cloth.

 

f

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth.

 

f

Do not use benzene, thinner, or rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case.

 

f

When using chemically treated dust cloths, follow the instructions written on its packaging.

Projection lens

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

 

f

Do not use a cloth that is fluffy, dusty, or soaked with oil/water.

 

f

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

 

f

The lens is made of glass. Hitting with a hard object or excessive force when wiping may scratch its surface. Handle with care.

Cleaning inside the projector

In certain environments, such as in dusty locations, dust accumulated around the intake and exhaust ports may degrade ventilation, cooling, 

and heat venting, and brightness may decrease as a result.
If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the projector or replace the light 

source unit.

Inspection

Ask your dealer for inspection by an expert at least once every three years.
If the projector is used for prolonged periods without inspection, it may catch fire, cause an electric shock, or fall.

 

f

For information about inspection costs, consult your dealer.

Attention

 

f

Do not leave the product in place after use. Put it away immediately to prevent it falling in the event of an earthquake, etc.

Summary of Contents for PT-JW130F


























































































































































































































Reviews:

No comments

Related manuals for PT-JW130F

Canon LX-MU500 Manual preview
LX-MU500
Brand: Canon Pages: 7
Canon LV-7250 Command Manual preview
LV-7250
Brand: Canon Pages: 10
Canon LV-7275 Starter Manual preview
LV-7275
Brand: Canon Pages: 6
Canon LV-X2 Brochure & Specs preview
LV-X2
Brand: Canon Pages: 2
Canon LV-7345 Owner'S Manual preview
LV-7345
Brand: Canon Pages: 44
Canon LV-7575 User Manual preview
LV-7575
Brand: Canon Pages: 63
Canon 7215 - LV XGA LCD Projector Assembly & Installation Manual preview
7215 - LV XGA LCD Projector
Brand: Canon Pages: 8
Canon LV-7280 Features preview
LV-7280
Brand: Canon Pages: 18
Canon LV-7240 Brochure & Specs preview
LV-7240
Brand: Canon Pages: 6
Panasonic PT-VX400 Operating Instructions Manual preview
PT-VX400
Brand: Panasonic Pages: 80
Energenie SIS-PWM Silver Shield User Manual preview
SIS-PWM Silver Shield
Brand: Energenie Pages: 20
Digital Projection MERCURY 5000gv User Manual preview
MERCURY 5000gv
Brand: Digital Projection Pages: 110
Planar PR6022 User Manual preview
PR6022
Brand: Planar Pages: 57
InFocus in5300 series User Manual preview
in5300 series
Brand: InFocus Pages: 56
P3 International P4320 Operating Manual preview
P4320
Brand: P3 International Pages: 10
Optoma Optoma ZU510T-W User Manual preview
Optoma ZU510T-W
Brand: Optoma Pages: 49
Tripp Lite D10B2-T Owner'S Manual preview
D10B2-T
Brand: Tripp Lite Pages: 12
Dukane 8106H User Manual preview
8106H
Brand: Dukane Pages: 106

Brands by name

Popular brands

Load more brands