Chapter 2
Getting Started — Installing/removing the projector
38 - ENGLISH
Attention
f
The main unit and the power supply unit are connected with cables, etc. Do not rotate or tilt the main unit more than necessary.
Note
f
After adjusted roughly, fine adjust the projection position while projecting.
f
The rotating fixing screw and the ball joint fixing screws are hexagonal socket head fixing screws (M6). Note that they will come off the
projector if they are loosened too much.
Removing the projector from the track system
1) Turn off the power of the track system.
WARNING
When removing the projector from the track system, be sure to turn off the power of the track system.
Electric shocks can result.
2) Remove the adapter cover.
f
While pushing both tabs at the upper side of the adapter cover inward (i), pull the cover in the direction of the allow (ii) shown in the
figure to remove.
(i)
(ii)
Tab